Economy Series
Feeding Speed:25m/min
  MODEL GS-423 GS-523 GS-623 GS-523U GS-623U
Capacity Planing width (mm)

10~230

Planing thickness (mm)

7~125

Min. working length (mm)

230

Feed speed (m/min)

6~25

Spindle Spindle speed (rpm)

6000

Spindle dia.

ø40 mm

Adjustment of vertical spindle (axial)

30 mm

Adjustment of horizontal spindle (axial)

20 mm

Cutter
Diameter		 First bottom horizontal spindle (mm)

ø100~150

Right / left vertical spindle

ø100~180

Top horizontal spindle

ø100~180

Bottom horizontal spindle (mm)

–

ø100~205

ø100~205

–

ø100~205

Universal spindle (mm)

–

–

–

ø100~180

ø100~180

Motor
Horsepower		 Bottom horizontal spindle

7.5 HP

7.5 HP

7.5 HP

7.5 HP

7.5 HP

Right / Left vertical spindle (1PC)

10 HP

10 HP

10 HP

10 HP

10 HP

Top horizontal spindle

7.5 HP

7.5 HP

7.5 HP

7.5 HP

7.5 HP

Bottom horizontal spindle

–

7.5 HP

7.5 HP

–

7.5 HP

Universal spindle

–

–

–

5 HP

5 HP

Feed horsepower

3 HP

3 HP

3 HP

3 HP

3 HP

Elevate horsepower

1/3 HP

1/3 HP

1/3 HP

1/3 HP

1/3 HP

Others Table adjustment (mm)

12

Infeed table length (mm)

2000

Machine dims. (L x W x 1727 ) mm
3251 x 1295
3378 x 1295
3937 x 1295
4115 x 1702
4267 x 1702
Packing dims. (L x W x 1981 ) mm
2235 x 1422
2337 x 1422
3048 x 1422
3277 x 1803
3429 x 1803
Net weight (kgs)
2,800 kgs

3,200 kgs

3,700 kgs

3,800 kgs

4,100 kgs

Gross weight (kgs)
3,100 kgs

3,500 kgs

4,000 kgs

4,100 kgs

4,500 kgs

0PTIONAL EQUIPMENT:

Feeding Magazine.
• Spindle digital positioning controller.
• Groove guide table.
• Spindle speed 8000 RPM.
• Auxiliary feed roller for short work piece.
• Extend infeed table length.
• Spindle motor increase.
• Tool radius display counter.
• Pressure board before top spindle, air pressure.
• Top spindle front/rear press board up-down
digital readout.
• CE certification.

NEXT PAGE

 

 

 

 

 

 

 

 

 

 
CONVENIENT INFEED ADJUSTMENT
The infeed table and fence are conveniently adjusted by the separate control levers.
OVER HEIGHT PROTECTION
In case work piece exceeds the rated maximum height, it will be restricted by the over height protection device provided at the work piece infeed end.
FRONT AND REAR PRESSURE PLATE
The front pressure plate features "draw - back" performance, which fully avoid damage on cutters caused by an over - height work piece.
The rear pressure plate provides extremely uniform holding pressure for outstanding parallelism accuracy of machining.
SIDE FRONT PRESSURE PLATE ON LEFT VERTICAL SPINDLE
It fully eliminates unsmooth problem when feeding short or narrow stock. The pressure plate is easy to adjust.
CONVENIENT SPINDLE ADJUSTMENT
All control levers for the spindles are located at the front of the machine for convenient adjustment. Each spindle is provided with a mechanical digital readout, giving accurate adjustment.
OPTIONAL
UNIVERSAL SPINDLE
This spindle can be tilted for complicated cutting jobs.
FEED MAGAZINE
This mechanism provides maximum convenience for feeding stock into the machine, keeping downtime to the minimum, and increasing the rate of production.
Especially helpful when cutting short stock.
ADJUSTABLE SHORT STOCK PRESSURE ROLLER
The pressure roller for short stock can be fast raised, providing maximum convenience while in cutter changing or setup.